GasSafety 247's Nottingham business base is in West Bridgford. Use this local hub to select the gas, boiler or heating work needed at your property, then call or WhatsApp to discuss an appropriate appointment. Homeowners can request maintenance, repairs or a survey; landlords can set out inspection and appliance-management requirements; business enquiries need the premises and equipment specified. Start with the outcome you want, not a guessed technical remedy. Provide the full address and relevant equipment so attendance, work eligibility, scope and any quotation can be agreed for the actual job.
Gas, Boiler and Heating Services: detailed service scope, booking and next steps
Explore this page
01
Connect a West Bridgford property with the Nottingham business base
A base location is different from an arrival promise
The business contact address retained on this site is 22 Franklin Drive, West Bridgford, Nottingham, NG12 4ER. It identifies the Nottingham base; it does not create a promise that an engineer is waiting nearby or that any particular slot is available. Discuss appointments by call or WhatsApp rather than assuming a walk-in service is offered at that address. A job at another West Bridgford address still needs its own equipment, access and scope information. The local relationship is useful because the service enquiry belongs to one Nottingham-based business, with the same contact channels and commercial responsibilities throughout the site.
It should not be confused with a chain of separate area offices. When you request work, ask for confirmation applying to your property and task, including the proposed attendance arrangements and the information needed before they can be finalised.
West Bridgford's role in Rushcliffe gives the hub its geographic context
Rushcliffe Borough Council's overview identifies West Bridgford as the borough's main population centre and describes Rushcliffe as lying immediately south of Nottingham and the River Trent. That locates this hub within the wider Nottingham target area without assigning a particular age, layout or appliance type to every local property. The council also identifies a town centre and significant sporting venues, including Trent Bridge and the City Ground. Those are geographic references, not evidence that GasSafety 247 has worked at the venues or maintains nearby premises.
For an enquiry, the practical starting point remains your address and the work needed there. If a local access arrangement or event affects the appointment you are requesting, explain it as a real circumstance rather than relying on the area name to tell the provider everything.
02
Select a local service by the result you need
Repair, maintenance, inspection and installation lead to different briefs
Choose a repair enquiry when something has failed, a maintenance enquiry when you want defined scheduled attention, an inspection when a specific assessment or record is required, and a survey when you are planning an installation or change. These categories can involve the same boiler but answer different customer questions. For example, restoring lost hot water is not the same task as recording routine maintenance, and a future replacement proposal is not a diagnosis of today's fault. The service links below connect each category to its dedicated West Bridgford route.
If you are unsure which category fits, describe the effect on the property and ask the booking contact to help define the request. An accurate brief can then identify the equipment and outcome without pretending the customer has already selected the professional test or repair procedure.
More than one task at the address should stay visible
A customer may want a boiler service, an assessment of a gas fire and investigation of a heating complaint at the same property. Put each item in the enquiry instead of reducing them to a general request for gas work. Ask whether they can be coordinated and what scope, qualifications or preparation applies to each. One address does not make every appliance identical, and one attendance does not automatically mean every requested task can be completed. If several people are responsible, identify which decision belongs to the homeowner, landlord, agent or business manager.
The service directory is a way to describe the work accurately, not a checklist proving that all listed work is included. A combined proposal should preserve the distinctions so the customer can understand what is booked, what is completed and what may need a separate next step.
03
Request a West Bridgford boiler assessment around the actual complaint
Explain which household function has changed
For a boiler concern, say whether the issue affects room heating, hot water, both functions or only a particular outlet or zone. Include the appliance identification if it is accessible and any exact message visible during ordinary use. Mention recent work and the first point at which the problem became noticeable without assuming that one event caused another. The West Bridgford boiler-repair page links this local enquiry to the repair category. Ask about diagnosis and the basis for a proposed remedy rather than selecting a part from an online discussion.
If somebody has already examined the equipment, send their findings. This allows the next provider to understand whether you are requesting a new investigation, an identified repair or review of an unresolved earlier problem.
A survey for replacement is a separate purchasing decision
If you are considering a new boiler, describe the household need and any existing assessment rather than asking for a generic replacement price based only on the address. The local installation and replacement route supports an enquiry about equipment, layout and proposed work. A repair report can inform that conversation, but it does not necessarily specify a complete replacement installation. Mention changes in hot-water use, building plans and any preferred position without assuming they are feasible. The survey and quotation should state the proposal's actual scope, dependencies and exclusions.
A West Bridgford location does not establish which boiler is suitable, and a website cannot promise a particular lifespan or bill reduction for equipment that has not been assessed.
04
Arrange planned boiler attention without hiding another need
Maintenance follows the appliance and its records
If your request is planned servicing, supply the boiler model, last available service document and any manufacturer's or agreement requirements you hold. Explain whether the appliance currently operates normally or has an outstanding complaint. Use the West Bridgford boiler-servicing route to request a defined maintenance appointment. A calendar preference alone does not establish the tasks needed for every model. Ask how the provider will identify the service scope and record its completion. If paperwork is missing, say so rather than inventing a maintenance date. New owners can share the documents received at handover and identify any uncertainty.
The resulting appointment should address the actual appliance history and current requirement, not repeat a universal service description merely because the home is in this neighbourhood.
Other gas appliances require their own description
A boiler appointment does not automatically include a cooker, hob or gas fire. If you want those items assessed, serviced or installed, name them separately and provide the information available for each. The local gas-fire services route and cooker and hob route help distinguish those requests. Explain whether an appliance is existing, newly purchased, unused or part of a planned alteration. Do not disconnect equipment for the visit or assume a photographed connector establishes suitability. Ask the provider to confirm the relevant work category and scope.
A coordinated appointment can be discussed, but the commercial agreement must say which appliances and tasks it includes. The benefit is a usable household brief rather than a vague promise to service everything gas-related in one undifferentiated visit.
05
Define the inspection and record being requested
A landlord's document need should match the appliance responsibility
For a rental property, identify the purpose of the inspection and the appliances involved. The West Bridgford gas-safety-check route is the local entry point for that enquiry, while the landlord service route connects broader management requirements. Give the previous record and explain which equipment has changed. A request for a certificate should not leave the provider guessing whether you mean an annual landlord record, maintenance evidence or an assessment after remedial work. State who manages the property and who should receive the completed documentation. If you want several tasks coordinated, keep their names and outcomes separate.
That helps the responsible person understand what has been commissioned rather than treating every gas-related document as interchangeable.
Owner-occupier assessments should address a stated concern
A homeowner might want equipment assessed before taking responsibility for a property, after discovering missing information or because a survey raised a question. Describe that trigger and provide the relevant extract or report. The request can then be framed around what can actually be assessed, with access limitations made clear. If a seller, occupier or building manager controls entry, arrange the necessary authority before confirming the appointment. Do not ask the provider to give a blanket assurance about equipment outside the agreed scope. If another contractor's alteration is involved, share the drawings or description of that work.
The inspection result should answer a defined question and identify any unresolved issue, rather than presenting a general pass for the entire property based on a visit to one appliance.
06
Describe heating and hot-water arrangements beyond the boiler
Room-specific complaints need a room-specific account
If comfort varies between rooms, name the affected spaces and describe the pattern during ordinary use. Mention recent extensions, radiator changes or control alterations as context without concluding that the whole heating system needs replacing. The West Bridgford central-heating repairs page and radiator services page connect these different enquiries. Ask whether the proposed visit covers a particular radiator, the distribution arrangement or a broader performance investigation. That boundary matters when comparing costs and expected outcomes. A house with one cold room may need a different assessment from a property where heating has stopped throughout.
The local hub should help articulate that distinction, not use the same boiler-repair promise for every complaint about warmth.
Stored hot water and control requests should identify the equipment
If there is a cylinder or another separate hot-water arrangement, include it in the enquiry and say which function is affected. If the issue concerns scheduling or control response, describe what you asked the system to do and what happened. Use the local hot-water cylinder category or heating controls category where those are the focus. The provider needs to confirm the equipment and task rather than assuming all heating controls, cylinders and boilers share one scope. Existing manuals, installation documents and ordinary external photographs may help identify the arrangement.
You do not need to open equipment or interpret technical diagrams. A precise request makes it possible to discuss the next professional assessment while keeping unrelated plumbing, electrical or account-support questions visible.
07
Plan an occupied-home appointment around real access
The room layout and entrance arrangement are property facts
Tell the provider where the equipment is and how an engineer would reach it. A front-door address may not explain a rear entrance, a converted unit, a locked side gate or access controlled by someone else. Describe those features only if they apply to your property. If ordinary storage blocks an approach, discuss what can safely be cleared before attendance. Do not remove connected equipment, sealed covers or specialist panels to make access look straightforward. Mention stairs, a high appliance position or other practical constraints in advance.
The provider can then say whether suitable arrangements are needed. The neighbourhood itself does not determine those conditions. A useful West Bridgford appointment brief records actual access rather than assuming every local home has the same age, entrance, heating layout or available parking.
Household arrangements can be discussed without publishing sensitive details
If an occupier needs help admitting the engineer or a family member will act as the contact, explain the arrangement directly by the agreed channel. You do not need to publish private medical information, access codes or personal schedules on the website. Identify a reliable contact and clarify who can approve the work. If the appointment must fit a particular window, state that before accepting it and ask what can realistically be agreed. Attendance and work duration are different matters, especially for diagnosis or an installation survey.
Keep pets and ordinary household arrangements in mind when discussing access, without treating those details as a technical diagnosis. A practical plan allows the customer and provider to understand who will be present, what can be reached and how a change to the arrangement will be communicated.
08
Coordinate rented-property work with the management chain
Tenant access and owner approval should not be confused
For an occupied rental, bring the tenant's observations, the agent's records and the owner's purchasing decision together. Give the access contact and the approval contact as distinct roles where appropriate. If the agent has authority to approve defined work, describe the limit and how findings should be sent. The occupier should know which task has been arranged and how attendance will be confirmed. A clear request prevents a visit from ending with useful findings but no route to an authorised next step. If an inspection, service and repair are all being requested, identify them separately in the property file.
This hub connects the local routes, but it does not transfer the landlord's responsibilities or give an access contact unlimited authority. The agreement should reflect the actual management arrangement for that West Bridgford address.
Handover and tenancy changes benefit from precise work records
When preparing for a change of occupier, explain which records you hold, which work is outstanding and the decision deadline. A deadline is helpful context, not proof that every task can be completed before it. If equipment changed during the previous tenancy, correct the appliance inventory and share the relevant documents. Distinguish planned attendance from completed work in communications with the next occupier or owner. Ask where the provider will send the inspection or service record and any follow-up proposal. A missing document should not be reconstructed from an assumed annual pattern.
Keep the actual result attached to the property and appliance concerned. This creates continuity between management decisions and professional attendance instead of relying on a vague statement that everything was checked before a handover.
09
Raise commercial enquiries with the premises and work category specified
A West Bridgford business request needs more than the trading name
Rushcliffe's overview describes West Bridgford's town centre, but it does not tell the provider what equipment is at your particular business. Give the premises address, the work requested and any existing plant or appliance information. The West Bridgford commercial-gas route is an enquiry category, not evidence that every specialist task is available. Natural gas, LPG, domestic equipment and commercial installations must not be treated as one interchangeable qualification. Ask for confirmation that the proposed work falls within the actual competence available. If a manager controls permits, isolation arrangements or access to plant, identify that person.
A quotation should address the premises and equipment in scope rather than make a general promise to service every business in the area.
Trading hours and operational effects should enter the proposal
Explain if attendance could affect opening, customer access or another contractor's work. State the practical requirement, such as access before a particular activity, without assuming an out-of-hours service or fixed response time is offered. The provider can discuss the real schedule and any further assessment needed. If several responsible people are involved, identify who can authorise work and who manages the site during attendance. Ask how findings will be communicated if the proposed task cannot proceed or reveals another requirement. Keep a business maintenance brief separate from a residential landlord inspection simply because the premises share an address.
The agreed outcome should be specific enough for the manager to understand what operation is affected, what has been authorised and what remains to be decided.
10
Include planned building changes before ordering installation work
A proposal affecting the building needs its own preparation
If you want an appliance moved, replaced or installed as part of a kitchen change or extension, provide the proposed layout and relevant drawings. Explain which parts are agreed and which remain under consideration. A maintenance appointment should not be treated as approval of a new flue position, altered enclosure or building design. Rushcliffe provides conservation-area information for defined areas in the borough. That directory does not establish whether a specific West Bridgford property is designated or whether a proposed alteration needs permission. Check the property's actual position with the relevant authority and share any requirements.
The service enquiry can then distinguish a technical survey from a separate planning or building-control decision, avoiding assumptions based on an area's general description.
Contractor sequencing should be visible in the appointment brief
If kitchen fitting, building work or another trade depends on the gas or heating task, set out the sequence and the responsible contacts. Ask the provider to confirm which stage it can assess or undertake and what must be ready first. An appliance delivery date does not itself confirm installation suitability or engineer availability. Likewise, a builder's planned opening does not establish that a proposed route is acceptable. Share existing advice and request a scope that identifies dependencies. This allows each contractor's role to remain clear without asking the customer to prescribe technical work.
A good proposal records what is being surveyed or installed, the customer approvals needed and any separate reinstatement or finishing work. It should not leave critical assumptions buried behind a single phrase such as fit the new boiler when the room is ready.
11
Plan local parking and event-related access using current information
Council parking information is a planning source, not an attendance guarantee
Rushcliffe's parking information links car parks, permits and other parking arrangements. Use the current information where relevant to your address, and explain any actual private access or loading condition to the provider. A public car park nearby does not automatically provide suitable unloading or equipment access for your job. Do not promise a reserved space unless you can legitimately arrange it. If an entrance is reached from a different street or courtyard, describe that directly rather than relying on the postal address. The provider can then consider the actual attendance arrangements.
This page does not publish assumed tariffs, travel times or blanket parking rules for West Bridgford. The practical objective is to identify a usable approach and any permission that must be confirmed before the appointment.
If a specific event affects your address, say how
The council identifies Trent Bridge and the City Ground within West Bridgford's sporting context. That does not mean every appointment is affected by an event or that GasSafety 247 has a special access arrangement around those venues. If you know a particular event will change entry, parking or a building's operating hours at your property, tell the provider what the actual restriction is and where the information comes from. Ask whether the proposed attendance should be reconsidered. Avoid estimating a faster route or promising a journey time based on proximity to the business base.
A local fact becomes useful when it changes a real booking decision. Otherwise it should remain geographic context, rather than a marketing story about engineers, customers or successful jobs that have not been verified.
12
Use surrounding-area routes without changing the identity of the business
The actual property area determines the local route
If the address is in Edwalton, Gamston, Lady Bay or another existing target area, use its own hub and give the full address in the enquiry. These links reflect the site's surrounding-area architecture; they do not claim identical boundaries, travel conditions or equipment across those places. The main Nottingham area hub remains the parent for the wider target inventory. West Bridgford is the business-base cluster, while other locations are represented as service areas. An address near a named area should not be forced into a route that creates a misleading description.
If you are uncertain about the most appropriate page, the booking conversation can use the actual address. No alternative local telephone number or invented office is needed to make that enquiry useful.
Nearby places should support a genuine relationship rather than duplicate claims
A local hub can connect related service areas while preserving each page's purpose. For a customer with more than one property, state which task belongs to which address instead of treating proximity as proof that one visit covers both. The provider can discuss the proposed schedule after the individual work is understood. Keep the same business identity and contact channels throughout. If you need the city-centre route, use Nottingham City Centre rather than treating this West Bridgford page as a substitute for every Nottingham address.
The site's geographic hierarchy helps people navigate, but an area link is not operational proof of staffing, branch presence or attendance time. The actual job agreement supplies those practical details where they can truthfully be confirmed.
13
Compare local proposals by evidence and defined scope
Registration checks belong to the proposed work
Before accepting gas work, ask how the attending engineer's identity and relevant work category can be checked. HSE explains that competence for domestic gas work is shown on the Gas Safe ID card; a broad business description should not replace that check. A proposal for a domestic boiler does not establish eligibility for a commercial appliance or an LPG installation. Give the provider enough equipment information to confirm the actual category rather than assuming that the service menu proves it. If a specialist task cannot be confirmed, ask what further information or alternative arrangement is needed.
This protects the accuracy of the appointment without creating a registration number or qualification that has not been verified on the website. Keep the confirmation associated with the task requested at your address.
Compare the same outcome rather than two headline prices
If you are considering more than one proposal, set out the requested result and compare the included equipment, assessment, attendance and documentation. One quote may cover diagnosis while another assumes a particular repair is already justified. A maintenance price may address a single boiler while an inspection proposal lists several appliances. Ask each provider to state the assumptions and exclusions so the comparison is meaningful. Also confirm who may approve a variation and how the agreed work will be recorded. A local address does not make different scopes interchangeable.
The customer should be able to explain why a proposal fits the required outcome using its actual terms, instead of deciding from an unsupported claim about speed, proximity or a universal lowest price.
14
Turn the local enquiry into a clear agreement
Define the first decision and the information supporting it
Send the property address, equipment involved and the result you need, then ask what the next appointment would assess or deliver. Include earlier findings where they help explain the request. A useful first decision might be to authorise diagnosis, arrange a specified inspection, commission maintenance or request a survey. Those are concrete steps even when the ultimate remedy remains unknown. Ask about the charge or quotation basis and how additional work would be approved. If an access problem, missing document or unconfirmed work category prevents booking, address that issue before treating the appointment as agreed.
Call or WhatsApp GasSafety 247 with the focused brief. The local hub's role is to connect your West Bridgford requirement to an appropriate professional service, with an outcome that can be understood and reviewed.
Completion should describe what actually happened at the address
After attendance, retain the record of completed work and any limitations or follow-up. An invoice, inspection document and service record can have different purposes, so ask for the explanation relevant to the task commissioned. If a proposed repair remains unapproved, keep it separate from completed work. If another visit is needed, record why and which preparation or part decision it depends on. A clear handover allows a homeowner, agent or business manager to continue from the actual result instead of restarting the enquiry from a generic description.
It also preserves truthful local information: the document belongs to the work at your address, not an invented case study on this page. The next action should follow the findings and agreement, with the Nottingham business contact available for the appropriate follow-up discussion.
Questions about gas, boiler and heating services in West Bridgford
Is West Bridgford the business base or only another target area?
The site identifies GasSafety 247's Nottingham base in West Bridgford and retains the supplied contact address. This makes the hub part of the primary business-location cluster. It does not imply a public walk-in counter, resident staffing for every job or an immediate attendance promise. Discuss appointments through the listed call or WhatsApp channel and obtain confirmation for the actual property and task.
Do I need to visit the Franklin Drive address to book?
Arrange the enquiry by phone or WhatsApp. A business contact address should not be taken as an invitation to attend without an agreed arrangement, and this page does not offer a walk-in booking service. Give the address where the work is needed and ask about scope, eligibility and attendance. The appointment concerns your property, not simply the proximity of that property to the Nottingham base.
How do I decide which of the 21 local categories to use?
Choose the outcome: repair a fault, maintain equipment, obtain a specified inspection or plan an installation. Then select the relevant appliance or system category. If several categories seem plausible, describe the effect on the property rather than choosing a technical cause. The booking discussion can refine the request. The category links help navigation; they do not establish a diagnosis or confirm every listed task is available for your equipment.
Can I request a boiler service and a gas-fire assessment together?
List the two appliances and the task required for each. Ask whether a coordinated visit is possible and what separate scope or preparation applies. The provider needs to confirm the relevant competence and arrangements. A combined attendance should not make the tasks disappear into an undefined whole-house service. The resulting records should say what was actually completed for each item.
Which local route is appropriate when hot water has stopped?
Start with the boiler-repair route if you suspect the boiler, while explaining whether every outlet is affected and whether heating still operates. If a separate cylinder or another arrangement is involved, mention it. Those details help determine the assessment scope without diagnosing a component from the symptom. Ask the provider to distinguish the boiler investigation from another hot-water or outlet issue where necessary.
Does the hub say all West Bridgford homes have similar heating systems?
No. Council geography locates the area but does not identify the equipment or layout at your address. Provide the actual appliance and system information you have. A house, flat, conversion or managed property can present different access and responsibility questions, but those examples are conditional prompts rather than claims about every local building. The proposed work should be based on your installation.
Can I use this page for an Edwalton or Gamston address?
Use the dedicated Edwalton or Gamston hub where it matches the property, then give the full address directly. This keeps the local description accurate while using the same Nottingham-based business and contact channels. The relationship between nearby target areas does not confirm identical access, appointment availability or work requirements. If you are uncertain about the route, state the address and task in the enquiry.
What should a landlord send for a West Bridgford appointment?
Provide the inspection or maintenance requirement, appliance list, previous relevant records and separate access and approval contacts. Explain any equipment change or outstanding recommendation. If multiple tasks are needed, name each rather than asking for a general certificate. State who should receive the completed documents. This connects the professional visit to the actual management arrangement without assuming the tenant may approve every cost.
Is a boiler maintenance record the same document as a safety inspection record?
They describe different work and should not be treated as interchangeable. Request the task and document you need by name, with the relevant appliance scope. If both are required, ask whether they can be coordinated and how they will be recorded separately. The local hub connects the categories, but the appointment agreement must state which outcomes are actually included.
What if I am buying a property and the survey raises a gas concern?
Share the relevant survey extract and explain the assessment you want before making the next decision. Confirm who can grant access and authorise attendance. The proposed visit should identify what can be examined and any limitation. It cannot provide a blanket assurance about equipment outside its scope. Keep the resulting findings with the original question so any follow-up is based on actual evidence.
How should I describe a cold room when the boiler still runs?
Name the affected room or rooms and explain whether the pattern is new or longstanding. Mention recent heating changes without asserting they caused the complaint. A radiator or wider heating assessment may be more appropriate than a boiler-only request. Ask which equipment the visit would cover and what outcome it would investigate. Room-specific observations help define the work without prescribing a remedy.
Does town-centre proximity establish commercial-gas eligibility?
No. Give the actual premises, equipment, fuel and requested work, then ask for confirmation of the available competence. The commercial category is an enquiry route rather than proof that every specialist installation can be attended. Identify the site manager and any access or permit arrangements. The proposal should match the defined business task, not a general claim about every West Bridgford business.
Should I assume a public car park is suitable for the engineer's equipment?
No. Current council parking information can support planning, but suitability for unloading and access depends on the job and property. Explain any actual private space, entrance or loading restriction to the provider and confirm permissions where needed. Do not promise a reserved space unless it is genuinely available to you. A nearby car park alone does not settle the appointment arrangements.
Can sporting events affect an appointment near my address?
If a specific event changes entry, parking or operating hours at your property, explain the actual effect and ask how the proposed appointment should be arranged. This page makes no blanket claim that every local visit is affected. Trent Bridge and the City Ground provide geographic context; they are not evidence of special access, venue contracts or past work by GasSafety 247.
Does a proposed boiler relocation require a different request from servicing?
Yes. A relocation or installation proposal needs a survey brief covering the intended change and relevant building information. Provide drawings and any existing advice or permission. Routine maintenance should not be treated as approval of a new appliance position or external alteration. Ask which decisions belong to the technical survey and which require confirmation from another contractor, owner or authority.
Is my property automatically in a conservation area because it is near one?
No. Use the council's property-specific information and advice to establish the actual position. A borough conservation directory does not determine the status of every address or approve a particular alteration. If the proposed work changes the building, share any confirmed requirements with the survey provider. Avoid inferring permission or restriction solely from a neighbourhood name or proximity to a listed area.
How do I arrange work if a relative will provide access?
Identify the person admitting the engineer and say who may authorise the work or a proposed variation. Share practical access arrangements directly through the agreed channel, including any restriction on the available window. Ask how findings will be communicated if you are elsewhere. The provider can then plan against real access and decision authority rather than assuming the person at the door controls every aspect of the job.
Will being close to the business base guarantee a quick repair?
No arrival or completion time is guaranteed by proximity. The job, appliance, competence, actual availability and any parts or access requirement influence what can be arranged. Request a confirmed appointment and distinguish diagnosis from completed repair. The West Bridgford base is truthful geographic positioning; it should not become an unsupported response-time or first-visit completion claim.
Can several properties be discussed in one management enquiry?
Yes, but provide a separate address, equipment brief and required task for each. State the access and approval contacts so findings and charges remain attached to the correct property. Coordination can be discussed after the individual jobs are understood. Nearby locations do not imply identical equipment, one universal quotation or proof that all tasks can be completed during the same attendance.
What is the most useful next step after choosing the local service?
Call or WhatsApp with the address, equipment and outcome you need, adding earlier records where relevant. Ask for the proposed scope, charging basis and attendance arrangement. Keep any additional task or approval condition explicit. After the visit, retain the completed-work record and separate follow-up proposal. This connects navigation on the hub to a practical, reviewable agreement for your actual property.
Speak directly with GasSafety 247
Need gas or heating help in West Bridgford?
Send the postcode, appliance details and what you need GasSafety 247 to assess.
Check the ID card